| Options |
| low-temperature environment | ºC | -25 |
| rollers |
| stainless steel (for food and other clean environments) |
| end stops | supplied with conveyor |
|
| upper shelf | supplied with conveyor in standard conveyor dimensions |
|
| sensor bracket | individually packaged |
|
| technical specifications |
| maximum load | kg | 1500 |
| standard length NL (outermost dimension of each end chain +5mm) | mm | 1150;1650;2150;2650;3150;3650;4150;4650;5150;5650;6150 |
| chain center distance W | mm | 750,850,950,1050（typically, pallet width - 150mm） |
| number of chain tracks |
| 2，3 |
| standard height | mm | welded on rollers, spaced at intervals of one roller |
| roller spacing (P) | mm | 05,05,05,05 |
| standard height | mm | 500,600,700,800,900,1000 |
| legs beam |
| no additional beam needed for heights below 650mm, add a beam at the bottom of the legs for heights above 650mm, add a beam between legs for heights above 850mm, height adjustable within approximately ±30mm |
| standard color |
| RAL7035 |
| driving unit position |
| inner side |
| pallet size | W | mm | 800~1200 |
| D | mm | 800~1200 |
| H | mm | 100~2000 |
| operating speed | m/min | 12、16、18 |
| reduction gearbox |
| R37 63rpm (i=22.27) R47 60rpm (i=23.59) R57 64rpm (i=21.93) |
| motor power | kw | 0.55, 0.75, 1.1 |
| surface coating |
| side beams, legs: powder coating; shaft, sprockets: blackening; rollers, adjustable feet, photoelectric switch bracket, etc.: zinc plating, |
| operating temperature | ºC | 1-40 |
| relative humidity | % | 5 to 90 without condensation |
| noise | dB(A) | 70 |
| execution standards |
| DIN EN ISO 12100 | mechanical safety foundation, overall layout guidelines |
| DIN EN 294 | hazard prevention: safe distance for upper limbs |
| DIN EN 349 | minimum distance to avoid harm to the human body |
| DIN EN 619 | continuous conveyor equipment and system safety and EMC requirements |
| DIN EN60204. Part 1 | general requirements for mechanical and electrical equipment. |
